Blackhawk Tools &
Big Guy
Productions
504-715-0512
AKA Cap'n Eddie Castelin 
330 Highway Drive
Old Jefferson, LA 70121-3415
ph: 504-715-0512
capneddi
Looking for a replacement cutter? Please measure your existing cutter and then check out the cutters I offer. Just guessing at the size will only cost you in time and me in $$$$. I sell cutters to replace EWT cutters every day. Save some $$$, measure your cutters and do a comparison below.
In order to get prices down, way below current market prices, We had to bring in lots of inventory. Big Guy Productions is a small business and we can't carry a large inventory burden. Other combos and specials are available on the Products and Services page.
ALL SHIPPING PRICES ARE TO THE USA! We credit the $4.00 automatic charge to all international shipping costs, you will be invoiced for the additional cost per packge. We do not multiply shipping costs!
We will break packages for all buyers, just ask! We'll also discount large orders and even send free stuff when we can. Everybody loves FREE STUFF!
All items are available by phone order to 504-715-0512 and can be charged to most credit cards. Give us a call and then give us a spin.
Smashed Diamonds fits 3/8" tool bar
This is identical to the diamonds currently being sold for EWT tools. Normally selling for about $16.00 each, we can give you a pack of three (3) for $29.00. The normal shipping charge is $4.00 per package, but you only pay for one shipping for multiple orders. These cutters do not include screws. I can't match others and don't try.
If you are into detail work, get a pack of the new "Smashed Diamonds"
- $
- In stock
New! 2SQ 10.7MM Square cutter FITS 3/8" TOOL BAR
This cutter replaces another manufacturer's cutter for a small device. The cutter is square, sharp corners and edge. It's 10.7 mm square and 1.7mm thick. Each package of three (3) cutters comes with three (3) stainless steel screws. Each order includes $4.00 for shipping to the USA.
- $
- In stock
NEW! 2R2 10.7MM Radius SQUARE FITS 3/8" TOOL BAR
This cutter replaces another manufacturer's cutter for a small device. The cutter is square but with a slightly radiused center. It's 10.7 mm square and 1.7mm thick. Each package of three (3) cutters comes with three (3) stainless steel screws. Each order includes $4.00 for shipping to the USA.
- $
- In stock
NEW! 8.8 mm (5) Round CUTTER FITS 3/8" TOOL BAR
This cutter replaces another manufacturer's cutter for a small device. The cutter is round. It's 8.8 mm round and 1.9mm thick. Each package of three (3) cutters comes with three (3) stainless steel screws. Each order includes $4.00 for shipping to the USA. Replacement code is "5"
- $
- In stock
12mm round Carbide cutters (actually 11.5mm) FITS 3/8" TOOL BAR
The perfect tool for hollowing both large and small pieces. The 12mm cutter fits on a 3/8' bar and takes small bites, but continues to bite when others give up. The three (3) cutters are shipped with three 6-32 screws, suitable for mounting on your bar or one you get from me. An automatic $4.00 charge is added for shipping to the USA
- $
- In stock
NEW! 16mm Round Carbide Cutters FITS 1/2"" TOOL BAR
This is what you are paying $18.00 each piece (plus freight) for all over the market. I will sell you three (3) cutters with 10-24 screws for $29.00 plus $4 postage to the USA.
Go ahead, shop this one around. It can't be beat.- $
- In stock
14 mm square Carbide cutters FITS 1/2"" TOOL BAR
The original cutters are now reduced in price if purchased in packs of three or more. The three (3) cutters are shipped with three 10-24 screws, suitable for mounting on your bar or one you get from me. ( I sell the 1/2" bars ala Carte by phone only)An automatic $4.00 charge is added for shipping to the USA
- $
- In stock
15 mm R2 (Radius Squared) Carbide FITS 1/2"" TOOL BAR
The favorite cutter for pen turners everywhere. The R2 cutter has a 100mm radius across all four faces and features softened corners. Great for making passes across a pen blank or shaping up that bowl.The three (3) cutters are shipped with three 10-24 screws, suitable for mounting on your bar or one you get from me. An automatic $4.00 charge is added for shipping to the USA
- $
- In stock
17mm Triangle Carbide CutterFITS 1/2"" TOOL BAR
A perfect cutter for detail work, beads and other work. This cutter fits on the standard 1/2" bar and features three cutting edges. The three (3) cutters are shipped with three 10-24 screws, suitable for mounting on your bar or one you get from me. An automatic $4.00 charge is added for shipping to the USA- $
- In stock
18 mm round carbide cutters FITS 1/2"" TOOL BAR
The biggest selling cutter of all is the 18mm round cutter. Works great for pens and other spindle work. Then doubles as a surface scraper on bowls, platters and more. The three (3) cutters are shipped with three 10-24 screws, suitable for mounting on your bar or one you get from me.
An automatic $4.00 charge is added for shipping to the USA
- $
- In stock
330 Highway Drive
Old Jefferson, LA 70121-3415
ph: 504-715-0512
capneddi
